
Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 7, Issue 1, 2025
CMP磨削过程中材料去除机理与磨损特性研究
赵国彬
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15216
工程预算定额在造价管理中的应用
赖美良
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15217
建筑结构设计中的隔震减震措施探究
杨鑫
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15218
分析地形图测量和地籍测量的应用
吴东光
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15219
浅谈地籍控制测量与地籍测绘成图技术应用
谷荣新
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15220
临近既有线MJS施工质量控制
徐勇斌
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15221
工程造价管理在建筑工程中的重要性及优化策略研究
陈露露
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15222
光伏组件效率提升技术及其发展趋势
仝晓芩, 姜仕兴, 黄志强, 王跃辉
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15223
灌区现代化改造与高效节水灌溉技术研究
尚华
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15224
市政工程造价超概预算原因分析与控制策略
盛云
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15225
现代信息化技术对建筑工程造价控制的影响
吴圆圆
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15226
煤矿水体下安全开采可行性分析
胡嘉鸿
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15227
建筑工程土建施工中桩基础施工技术
孙超
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15228
农田水利工程中安全生产管理的优化措施
王欢
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15229
建筑工程施工阶段造价控制策略及优化路径研究
叶静茹
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15230
水利水电工程基础处理施工技术分析
陈涛
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15231
电力建设项目中建筑施工技术的创新与应用研究
武少帅
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15232
石油化工工程中节能减排技术的应用研究
王燕坡
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15233
基于BIM技术的建筑工程管理优化与研究
徐增鑫
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15234
建筑结构设计中的安全隐患及解决措施
朱涛
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15235
住宅建筑工程屋面防水施工技术要点分析
吕洪兵
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15236
土木工程行业智能建造与新能源发展趋势概述
许运伟
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15237
基于BIM技术暖通工程设计与施工应用研究
王轶娴
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15238
建筑工程项目成本优化中的精细化管理研究
李国伟
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15239
新时期土木工程管理的常见问题及优化策略
陈伟强
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15240
大跨度钢结构施工重点要点技术探究
王卿, 王淑颖
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15241
高盐水域桥梁桩基耐久性防护技术应用分析
李宁
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15242
1060铝合金铸轧板坯料裂边控制
杨俊宝, 李振来
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15243
焦化厂泵设备常见故障诊断与维修技术探讨
李东辉
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15244
焦化厂自动化仪表的故障预防及维护策略分析
魏东
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15245
长输油气管道水平定向钻穿越施工技术研究
范佳豪, 王佳旭
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15246
住宅建筑工程预算审计与结算控制策略的优化与实施路径研究
陆益甜
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15247
建筑电气消防供配电系统设计要点及探讨
丁鹏飞
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15248
市政道路沥青混凝土路面裂缝修补技术解析
刘洁
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15249
建筑工程施工阶段造价控制策略与优化路径研究
杨沛沛
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15250
超低能耗建筑项目技术经济重难点及增量成本分析
黄辉
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15251
招投标环节中BIM技术的集成应用与风险控制研究
邢海蓉
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15252
灌区农田水利渠道设计与施工技术
周志华
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15253
建筑工程装配式施工技术创新与应用实践
于冰冰
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15254
高等数学在铁道工程地质数据处理与分析中的应用
郭萃
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15255
某深基坑工程岩土工程勘察中抽水试验的应用
郭嫚
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15256
高层建筑消防工程防排烟施工技术分析
李信元
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15257
基于绿色环保理念的建筑给水排水系统设计探究
廖园, 莫华
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15258
基于土木工程中混凝土施工技术研究
韦乔夫
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15259
高速铁路桥梁施工过程中的质量控制与优化技术分析
安晓鹏
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15260
机电安装技术及安装质量控制的探讨
王震强
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15261
工业设备结构抗震性能分析与设计优化
郑斌杰
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15262
房建工程质量管理体系构建与实施效果评估
张立斌
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15263
BIM技术在装配式建筑设计与施工一体化中的应用研究
李佳
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15264
新能源供热技术经济性评估与市场拓展策略探究
金煜凯, 于文博
Architecture Engineering and Management
|
Volume 7 Issue 1, 2025
|
PDF
DOI: 10.33142/aem.v7i1.15265
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.