Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 5, Issue 7, 2023
浅谈石油化工仪表自动化设备的故障预防与维护措施
刘飞宇
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9234
建筑施工中地基基础工程的施工技术处理措施
蒋宇
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9235
煤矿机电设备的安全管理与维护研究
李明哲
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9236
浅谈煤矿井下机电设备维修及管理的合理优化
李明哲
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9237
上向式水平充填采矿法采切工程优化
王琪钱
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9238
建筑结构设计技术优化的研究与应用
李静, 刘铁成
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9239
建筑工程管理中工程造价的管理控制
陈侨
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9240
路桥施工中填石路基施工技术的应用分析
张仁全
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9241
基于工程量清单计价模式的工程造价风险管理
马锐
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9242
建设工程项目招投标管理研究
张骏
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9243
建筑工程施工质量检测的重要性及验收要点分析
张保赛
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9244
基于生态环保的城市环境工程污水治理研究
兰伟
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9245
BIM技术在住宅建筑施工管理中的应用研究
杨雷
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9246
浅析建筑工程造价预算控制要点及措施
张苗
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9247
浅谈工程造价管理信息化建设
张苗
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9248
建设工程造价超预算的原因与控制策略
贾雨欣
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9249
浅析建筑工程造价超预算的原因与控制措施
贾雨欣
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9250
对建筑暖通工程中的bim技术运用的探析
胡雅坤
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9251
基于改进LSM的多工作面线性工程施工进度优化
李冰
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9252
论地基基础检测中的常见问题及解决对策
苏纪
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9253
高速公路桥梁加固施工技术的要点探析
李彬
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9254
BIM技术在装配式建筑工程施工管理中的应用研究
史晓琳
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9255
电气及自动化在机电工程中的应用分析
左京刚
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9256
建筑工程地基检测技术要点与优化分析
张洪奎
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9257
浅谈北方地区沥青混凝土路面的裂缝与防治
李超
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9258
建筑给水排水设计及施工技术质量管理分析
王静肖
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9259
建筑暖通空调的节能及优化处理研究
李强
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9260
项目管理理论在市政工程管理中的应用研究
向波
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9261
BIM技术及其在建筑设计中的应用研究
霍明珠
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9262
水利工程中河道堤防护岸工程施工技术策略研究
麦麦提•麦合木提
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9263
基于液压控制的手车防倾倒装置设计与优化
刘斌
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9264
煤制乙二醇主要工艺单元技术新进展
王伟, 张方英, 赵浩淼
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9265
建筑工程材料检测试验及常见问题探究
张华夏
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9266
建筑工程质量检测和检测技术的若干要点的分析
刘雅丽
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9267
建筑工程施工现场管理及优化措施
孙帅帅, 刘春利
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9268
建筑工程质量管理方法及应用
刘春利, 孙帅帅
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9269
聚合物水泥防水涂料的耐久性研究
郑浩, 蒋青青, 吴韵加
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9270
国土空间总体规划与城市更新改造路径研究
樊祥伟
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9271
商品混凝土现浇楼板开裂成因分析及处理方法
吴成全, 占晨光, 刘傲, 常明远, 吴朝堂
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9272
关于城市圩区工程建设的展望与探讨
孟祥光, 臧松
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9273
基于BIM技术对暖通空调施工过程中的管控探讨
姜晓春
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9274
建筑工程管理中常见问题和对策的综合探讨
周勇武
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9275
后浇带施工技术在房建施工中的应用分析
李秀楷
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9276
防渗漏施工技术在房屋建筑工程中的应用
韦清海
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9277
建筑工程施工阶段工程造价的控制与管理
于飞
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9278
建筑景观工程中的景观环境艺术设计理念的应用
孙宙, 许茗钧
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9279
房屋建筑和市政基础设施工程质量监督管理研究
马萌萌
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9280
试析生态环境工程技术创新与应用
余永丰
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9281
基于招待所室内装修水电改造技术研究
王永谦, 于洋, 苏沫, 曹郡
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9282
浅谈多种技术在轻钢龙骨隔墙施工中的应用
刘海锋
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9283
建筑混凝土材料强度检测的技术解析
崔洪欣
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9284
建筑工程设计阶段工程造价控制与管理措施分析探讨
周静
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9285
公路施工管理中存在的问题及对策研究
彭硕
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9286
市政工程施工技术通病分析与对策研究
罗云涛
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9287
高层建筑结构施工特点和施工技术探讨
王坤磊
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9288
“互联网+”时代的建筑工程管理信息化建设路径分析
陈芳
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9289
论建筑工程项目管理中材料成本控制探讨
甄娟
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9290
高层建筑工程施工中桩基础施工技术分析
曾慧友
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9291
房屋建筑地基基础工程施工技术分析
马朝
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9292
色彩美学在建筑立面设计中的应用研究
孙赛铮
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9293
陶瓷涂层活塞杆在往复式压缩机中的应用浅议
关洪浩
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9294
论如何加强市政工程道路与桥梁施工质量管理
张奇
Architecture Engineering and Management
|
Volume 5 Issue 7, 2023
|
PDF
DOI: 10.33142/aem.v5i7.9295
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.