Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 5, Issue 4, 2023
土木工程结构设计中抗震设计要点的研究
陀学霖, 覃汲艳
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8372
建筑结构设计中的抗震设计分析
林国雄, 陈洁
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8373
施工项目成本审计方法分析及跟踪审计工作思考
陈田
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8374
建筑工程项目施工成本控制方法的研究
曹幸娟
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8375
市政道桥施工中预应力技术应用分析
张波
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8376
房屋建筑结构设计中常见问题分析
贾占香
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8377
论绿色施工技术在道路桥梁施工中的运用探究
白茹萌
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8378
工程造价的全过程跟踪审计控制方法的探讨
詹晶晶
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8379
浅谈建筑工程管理影响因素及优化措施
王申良, 徐潇彬, 闫得力, 沈涛
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8380
二次结构施工与质量控制
李泽
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8381
论房屋建筑施工中钢筋混凝土结构施工技术的应用
贺鹏远, 钟禹, 田晓准
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8382
公路工程施工技术在软土地基中的应用
任靖
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8383
浅谈建筑工程造价预算控制要点及其把握
王振兴
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8384
建筑工程造价超预算原因分析及控制措施分析
钱安娜
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8385
建筑工程中的物料集约化管理研究
尹国栋
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8386
建筑工程管理模式创新路径的探析
阮明礼
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8387
高密度电法在雷州半岛东部海岸带综合地质调查中应用
李先锋, 张德程, 郑立龙
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8388
大型综合高速铁路站房绿色施工技术应用及推广
潘达
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8389
建筑设计与园林景观设计的融合研究
季宇飞
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8390
钢结构工业厂房建筑设计要点分析
张金玲
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8391
对建设工程管理模式的创新策略分析
石伟
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8392
煤矿机电自动化集控技术的发展与应用
时昊
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8393
浅析公路桥梁软地基的施工技术
黄少龙
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8394
建筑工程监理中存在的问题及对策分析
张玉龙
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8395
建筑工程项目管理中施工现场管理优化策略分析
严晨皓
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8396
建筑工程造价超预算原因以及控制措施
王梦雅
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8397
高层建筑给排水施工技术的若干要点分析
季芳杰
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8398
基于BIM的装配式建筑智慧建造结构体系研究
孙红阳
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8399
基于BIM技术的智慧建筑施工成本控制研究
孙红阳
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8400
沥青混凝土路面工程病害及防治技术研究
刘子阳
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8401
公路桥梁隧道的试验检测分析
陈红军
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8402
建筑工程造价预结算与施工成本管理探析
顾维维
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8403
EPC工程总承包项目的全过程造价控制研究
巴冬叶, 俞雄文
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8404
基于BIM技术的工程造价精细化管理策略研究
陈皓
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8405
地质灾害勘察与工程治理技术策略分析
常进
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8406
建筑工程中无机非金属材料水泥与混凝土的检测
何铭阳
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8407
建筑工程项目管理工作中的成本控制措施对策
李星辰
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8408
公路桥梁施工中预应力技术应用
刘汇
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8409
路基沉陷注浆施工技术在高速公路施工中的应用
陈雪峰
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8410
建筑工程管理中的创新模式应用及发展分析
廖威
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8411
BIM技术在装配式建筑设计中的研究与实践新探
张俊彬, 赵鹏海
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8412
浅谈沥青混凝土路面施工技术与质量控制策略
仇杰峰
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8413
关于绿色施工概念下的建筑工程施工研究
李文涛
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8414
土建施工中混凝土施工技术要点分析
高超
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8415
机械电气自动化技术与控制探究
娄桂林
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8416
建筑工程招投标阶段造价控制的影响因素与应对措施
李永涛
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8417
高层建筑绿色设计策略分析
李斌, 宫玉磊
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8418
现代化低碳理念下绿色节能建筑设计分析
宫玉磊, 李斌
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8419
散货堆场喷雾除尘器设计
张兵, 高强
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8420
论建筑合同管理实施要点与风险控制
邹秸如
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8421
建筑工程招投标中招标代理的作用
丑伟
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8422
矿山机电设备的管理及维护检修应用研究
孙高锋
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8423
小型钢悬挑架反向落地转换施工技术研究
梁勇
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8424
外墙保温一体板在房建施工中的质量控制
刘哈达
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8425
生态城市视域下市政给排水规划设计的作用分析
陈卓
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8426
论BIM技术在建筑工程管理中的应用
赖付平
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8427
公路桥梁工程中现浇箱梁的施工技术研究
冉君令
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8428
公路桥梁施工技术及施工管理问题探究
景丽莉
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8429
公路桥梁工程施工及安全管理研究
贾乐
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8430
基于既有围护结构进行新建逆作法改造优化技术研究
王春军
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8431
水利水电施工项目安全管理探究
蒋根华
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8432
高速公路桥梁加固施工技术要点探析
孙兆伟
Architecture Engineering and Management
|
Volume 5 Issue 4, 2023
|
PDF
DOI: 10.33142/aem.v5i4.8433
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.