![](/static/viser/img/banner.jpg)
Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 6, Issue 7, 2024
建筑工程中深基坑支护施工技术的应用研究
高寒
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12639
谈建筑机电安装工程的施工技术管理及质量控制
张子帅
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12640
大型会议会展综合体钢结构工程资料管理
张建云, 李威, 范继可, 郑杰超, 覃飞翔
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12641
论装配式建筑工程管理的影响因素与改善对策
王硕
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12642
论建筑土木工程中施工质量的控制措施
姜杰
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12643
装配式混凝土桥梁设计施工技术分析
黄宁
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12644
市政道路设计的若干问题和解决措施
陈建辉
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12645
基于BIM技术的市政公用工程施工技术创新研究
田光辉
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12646
市政道路桥梁施工中现场施工技术的应用
汪元庆
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12647
建筑电气工程中的智能化技术应用
吴春
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12648
道路桥梁设计的现状及改善路径
薛麦云
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12649
城市道路交通设计中存在的问题及改进措施
赵丽珊
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12650
海绵城市理念在市政道路设计中的应用
王景
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12651
城市市政道路设计的方法及思路
冯晓璐
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12652
建筑电气安装中防雷接地施工技术探讨
曹义超
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12653
建筑电气设计中消防配电的重要性与应用
苏辰雷
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12654
智能化技术在建筑电气设计中的应用分析
吴春明
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12655
房产测绘信息化建设与应用管理研究
王绍华
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12656
建筑电气安装中防雷接地施工技术的应用与质量管理
张玉龙
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12657
建筑电气工程中的漏电保护技术分析
张齐才
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12658
电梯机电设备安全运行维护探究
杨鹏远, 金有为
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12659
绿色建筑设计在装配式住宅建筑设计中的应用研究
李凡
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12660
装配式钢结构建筑主体施工技术研究
孙悦
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12661
建筑施工中深基坑支护的施工技术与管理
王黎黎
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12662
市政园林绿化工程施工技术的探讨
谢明燕, 谢明虎
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12663
建筑结构设计优化措施与技术的探讨
李庭玉, 莫丽婷
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12664
浅谈道路与桥梁施工中的裂缝问题的解决对策
王宏伟
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12665
工程测量中无人机测绘技术的应用探讨
乔思奇
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12666
论生态建筑设计在国土空间规划中的应用
张杰
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12667
医院装修项目施工技术的应用与管理
迪力木热提•依丽达娜
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12668
土木工程建筑结构设计中的问题与解决策略分析
刘万里
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12669
高原冻土水合物钻探冲洗液的研究
杨新江
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12670
供配电自动化控制系统应用
徐志勇
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12671
建筑工程施工中混凝土浇筑工艺及裂缝控制解析
克热木•艾尔肯
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12672
浅谈建筑工程的装饰施工技术
胡君华
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12673
安装工程造价预算结算审核要点探究
范娟, 陈华栓
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12674
建筑工程监理的现状分析及规范化研究
汪鸣
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12675
绿色施工技术在道路与桥梁工程中的实践
李峰
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12676
道路与桥梁工程路基施工技术研究
王艳军
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12677
新时期的工程造价管理创新的新思路
刘海甲
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12678
市政工程招标活动中应注意的几个问题
张莉梓
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12679
建筑工程施工技术管理水平有效提升策略的研究
王春燕
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12680
智慧城市中绿色建筑及暖通空调设计研究
陈敬
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12681
DeST模拟下窗帘对农村住宅建筑负荷的影响
李先越, 林珩, 金光虎
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12682
建筑机电设备安装施工安全风险及优化措施探讨
高启源
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12683
建筑钢结构工程低温焊接技术应用研究
唐家杰
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12684
谈建筑结构设计中常见问题与解决措施分析
郝燕
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12685
谈概念设计与结构措施在建筑结构设计中的应用
刘红伟
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12686
顶管技术在市政给排水工程施工中的运用探究
王亚玲
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12687
浅谈市政工程道路排水管道施工管理
马娜
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12688
市政工程管理中的全过程造价控制策略探讨
马杰
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12689
机电工程施工管理中存在的问题分析及改进措施
骆源超
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12690
道路桥梁沉降段路基路面施工技术的应用分析
惠鹏
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12691
水利工程施工中的边坡开挖支护技术探讨
周旭
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12692
水利水电工程中地质勘测及其技术应用研究
袁鹏
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12693
水利工程中水库堤坝防渗施工技术及防治方法
玄徴玥
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12694
市政工程变更对工程项目管理的影响及其对策研究
买买提•米克仁沙
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12695
水利水电工程中灌浆施工技术处理方法研究
陆志新
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12696
建筑结构设计优化措施与技术探讨
张伯文
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12697
污水处理工程施工管理问题及对策研究
缪鹏宇
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12698
EPC总承包项目建筑安装工程造价控制措施
辛桂梅
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12699
浅析建筑施工管理存在的不足及应对措施
伍江
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12700
路桥施工技术及质量控制策略分析
谭镜
Architecture Engineering and Management
|
Volume 6 Issue 7, 2024
|
PDF
DOI: 10.33142/aem.v6i7.12701
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.