Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 5, Issue 2, 2023
复合EPS装饰线条在建筑工程中的应用
王常进
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7888
煤矿瓦斯治理理论与技术
张瑞运
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7889
工程建设招标代理机构信用管理探索研究
李细珍
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7890
装配式建筑施工技术在工程施工管理中的运用分析
蒋福祥
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7891
自然资源调查监测地表覆盖成果质检关键技术探讨
田磊, 张磊
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7892
低碳概念下的建筑设计应对策略分析
杨挺
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7893
论岩土勘察工程中的问题与应对措施
缪昌明
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7894
东北黑土地保护利用和地质调查监测
佟磊, 董凯
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7895
探究房屋建筑施工技术应用中的创新性
史小创
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7896
建设工程质量管理标准化探索与实践研究
孙燕燕
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7897
浅谈蒸压加气混凝土砌块施工质量控制措施分析
杨佳晋
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7898
工程地质勘察在治理工程设计中的应用
刘天晓
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7899
地质钻探技术在工程地质勘察中的应用分析
宋海伟, 孙茂鑫
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7900
冀北地区高羊茅根-土复合体抗剪特性研究
阮梦柯, 刘杰, 刘嘉璐, 王万梅, 张喆
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7901
节理岩体中交通工程支护结构力学特征分析
王卫平
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7902
市政道路工程中沉降段路基路面施工技术
杨丽华
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7903
大型混凝土排架结构老厂房安全化改造
纪峰
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7904
论建筑工程管理与绿色建筑工程管理研究
朱军
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7905
桥梁工程塔吊施工安全技术管理探讨
张子建
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7906
建筑工程施工管理成效对工程造价控制的影响
张雪琴
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7907
桥梁施工管理安全和质量控制分析
禹华彬
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7908
回填地基处理要点浅析
杜鹏
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7909
基于SWOT分析的国际工程现汇项目市场营销策略制定——以G国的P项目投议标为例
田圣楠
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7910
矿山污染场地环境治理中的水文地质勘察技术分析
萨茹拉, 张锐, 葛飞
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7911
建设工程管理模式的创新策略分析
董济原
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7912
基于BIM技术在暖通空调施工中的应用价值研究
吴海鹰
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7913
信息时代煤炭检测实验室构建研究
施莹
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7914
建筑工程安全施工管理标准化建设思路探索
邵博文
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7915
建设单位对工程建设项目全过程造价管理的控制
李鹤
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7916
公路拼接桥梁桥面横坡调整方案研究
李海洋, 王恒武
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7917
浅析如何在建筑结构设计中提高建筑的安全性
商冲
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7918
电气工程及其自动化技术在智能建筑中的应用
王兴刚
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7919
建筑机电设备安装施工的主要环节与优化措施
糜健
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7920
建筑电气自动化系统安装的施工技术探讨
常天辰
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7921
灭火救援安全防护技术及措施
程绍龙
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7922
全过程造价管理办法在市政工程管理中的应用
刘斌
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7923
建筑暖通工程中的BIM技术运用探究
滕思远
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7924
关于建筑暖通消防防排烟设计的探讨
曹鸿利
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7925
虹吸式雨水排水技术在建筑施工中的应用
宁鹏
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7926
超高层建筑排水及消防系统设计方法分析
郭加兴
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7927
关于建筑工程造价的动态管理分析及成本优化控制探讨
叶淑君
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7928
机械设备电气工程自动化技术的应用策略
李谦
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7929
建筑工程管理与绿色建筑工程管理研究
周淼
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7930
城市园林绿化中如何加强病虫害防治
陈千金
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7931
公路桥梁施工过程中的质量控制与管理
陈开成
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7932
建筑结构工程质量检测中的无损检测技术
阳建湘
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7933
市政道路工程施工质量控制难点及存在的问题探究
潘佳淳
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7934
市政工程建造治理研究辨析
马强
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7935
绿色施工技术在道路与桥梁施工中的应用
乔传信
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7936
土木工程施工当中深基坑支护的施工技术分析
石贺洋
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7937
建筑工程造价超预算原因及控制措施
张宁
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7938
房屋建筑工程竣工资料管理系统研究
王雪萌
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7939
市政工程安全文明施工管理问题与对策探讨
李建宇
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7940
建筑电气节能创新设计及应用研究
李尚泽
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7941
论建筑工程项目的成本控制与造价管理策略
李鹤
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7942
工作阻力大于10000kN液压支架结构件制造工艺
黄维康, 张玉宝, 李松竹
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7943
房屋建筑现场施工技术与管理措施探讨
杨远吉
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7944
建筑工程中的绿色施工技术应用
李惠远
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7945
新型绿色建筑工程造价预算与成本控制
刘伟
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7946
水利施工管理中存在的问题与相应改进措施研究
陆跃兵
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7947
水利水电工程坝体混凝土施工质量管理探讨
刘念
Architecture Engineering and Management
|
Volume 5 Issue 2, 2023
|
PDF
DOI: 10.33142/aem.v5i2.7948
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.