Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 5, Issue 9, 2023
建筑工程设计中BIM技术的应用分析
种传超
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9697
如何加强建筑工程施工技术的管理
陈磊
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9698
基于5G通信的物联网技术应用
李光
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9699
建筑工程造价超预算的原因分析与控制策略
王立起
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9700
新时期测绘地理信息与自然资源管理深度融合
邹悦
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9701
关于提升建筑施工现场安全管理水平的思考
任怀强
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9702
建筑工程质量安全管理存在的问题及对策
张莉
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9703
高速公路交通安全设施施工技术的要点与质量控制
张庚泉
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9704
工民建混凝土结构工程施工裂缝处理探讨
赵凯
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9705
跨国油气长输管道建设项目管理模式创新探讨——以尼日尔贝宁原油外输管道项目管理实践为例
任晓春, 段宏亮
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9706
市政道路排水管道施工技术难题及发展方向
左立波
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9707
建筑施工质量管理问题及优化措施
宋志远, 孙云飞, 隋忠梅, 任福斌, 徐荣凯
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9708
绿色节能建筑施工技术质量控制与管理
孙云飞, 宋志远, 任福斌, 隋忠梅, 徐荣凯
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9709
浅谈市政工程的全过程工程咨询管理对策
张珽
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9710
浅谈新能源项目工程管理的有效途径
王娅卓
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9711
浅析如何有效提高建筑工程施工技术管理的水平
王凯
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9712
热能表计量检定的技术研究
张伟静
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9713
建筑暖通空调标准化节能技术相关探讨
刘建明
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9714
一种紧固件半自动拣配的作业方式
韩月娇
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9715
公路简支转连续T梁桥车桥耦合振动响应研究
刘律
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9716
土木工程施工中节能绿色环保技术探究
种超
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9717
浅析幕墙施工管理要点及注意事项
李增民
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9718
论土木工程建筑中混凝土结构的施工技术
赵昊
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9719
建筑工程造价超预算的原因与控制策略分析
宋立娜, 王君梅
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9720
工民建工程混凝土施工技术探讨
何渊
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9721
组合地基处理技术在高填方建筑场地中的应用
刘杰
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9722
城市极端降水事件背景下的海绵城市建设策略
李宝华
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9723
超低能耗建筑住宅产品方案选型
彭建军
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9724
工程造价全过程跟踪审计控制方法探究
张盛杰
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9725
单一煤层浅孔注水湿润煤体有效影响半径研究与应用
尹斌斌
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9726
建筑施工中绿色建材质量控制措施研究
孟浩
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9727
建筑工程土建施工现场管理的优化策略研究
袁先慧
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9728
建筑工程造价预算控制要点及策略
李晓凤
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9729
论建筑工程管理中的全过程造价控制研究
李晓凤
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9730
探析建筑工程设计中的节能建筑设计
董睿
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9731
浅析绿色建筑材料在土木工程施工中的应用
高立旦
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9732
建筑给排水工程中智能化技术的应用研究
郑高峰
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9733
航空电子设备故障诊断技术研究综述
李鹏飞, 刘伟, 徐波, 问钰强, 王雪婷
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9734
建筑工程管理与绿色建筑工程管理的探讨
邱小刚
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9735
道路桥梁施工中钻孔灌注桩施工技术的应用
肖琳
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9736
湿法排渣法粉煤气化技术渣水初分装置可行性研究
刘东华
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9737
绿色建筑设计理念在建筑工程设计中的融合应用
丁凌峰
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9738
复杂条件下深基坑支护施工技术的应用分析
尹桂明
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9739
浅谈炼油化工工程造价全过程管理
张亮
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9740
BIM技术在装配式钢结构建筑设计及施工中的应用
孙悦
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9741
论建筑工程造价的影响因素与降低工程造价的对策
陈红维
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9742
探析建筑工程造价全过程控制的问题及解决方法
唐祝英
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9743
建筑暖通空调系统的节能设计要点研究
罗娟
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9744
大体积混凝土结构施工技术在工程建筑中的应用
张彬, 杨健
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9745
建筑施工安全管理中高处坠落事故分析及预防措施
谢东全
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9746
煤炭散货码头输煤系统粉尘治理的研究与探索
李国栋
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9747
市政给排水工程管道施工管理措施探究
赵波
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9748
建筑工程技术管理模式创新探索
刘国庆
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9749
建筑学设计中的生态建筑设计的发展研究
王育娟, 张捷
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9750
分析钢纤维混凝土施工技术在路桥施工中的应用
张仁全
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9751
液氨生产使用中的危险与安全管理工作研究
黄培
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9752
煤矿电气自动化控制系统应用优化分析
杜伟东
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9753
绿色建筑设计的发展趋势
王育娟, 张捷
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9754
10kV电缆中间头故障成因及解决对策分析
郭亚洁, 刘畅, 封硕
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9755
电缆故障查找分析及提升配电网电缆线路运维水平策略
刘畅, 封硕, 郭亚洁
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9756
10kv配电环网柜数据远程可视化系统研究
封硕, 郭亚洁, 刘畅
Architecture Engineering and Management
|
Volume 5 Issue 9, 2023
|
PDF
DOI: 10.33142/aem.v5i9.9757
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.