Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 5, Issue 8, 2023
职业学校校园规划方法探析——以枣庄应用技术职业学院为例
张捷, 王育娟, 丁一凡, 周朝一
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9439
基于绿色建筑技术的办公建筑设计研究——以迈迪顶峰医疗公司研发楼与厂房设计项目为例
张捷, 王育娟, 丁一凡, 周朝一
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9440
绿色建筑施工管理及在建筑施工管理中的应用
刘国庆
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9441
海绵城市技术在风景园林设计中的应用
李晓萌
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9442
降低TOBSPIN切丝机“窗花烟丝”的研究
庞哲忠, 郭鑫鑫, 康文军
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9443
苯加氢萃取精馏系统工艺优化与应用
张宏亮
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9444
苯加氢工艺比较及设计中的注意事项探讨
张宏亮, 吴春松
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9445
旧水泥混凝土路面微裂均质化处治后路面结构力学响应分析
刘倞, 潘学奎, 俞金龙, 徐东
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9446
施工单位的工程造价管理和成本控制研究
马晓芸
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9447
铜试剂银光度法测定尾矿中的砷
姜俊岭
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9448
乡村振兴背景下乡村旅游可持续发展制约研究
罗玉吉
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9449
CSAMT方法在浙江桐庐莪山畲族乡地热资源勘查中的应用
安柱, 谢启贤, 王富春
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9450
公路工程施工技术管理及控制研究
史立超
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9451
设计阶段公路工程造价编制存在的问题与预防
师珊
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9452
建筑工程地基检测技术要点及优化策略
马晓明
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9453
医院项目招投标及实施阶段投资控制要点分析
郭泽飞
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9454
跨地铁运营隧道的地下空间施工组合技术研究
谭冲
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9455
浅谈建筑地基不均匀沉降的施工技术
方斌承
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9456
工作面超前支护技术研究与实践
杨利利
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9457
高压电缆故障的分析判断和故障点查找
封硕, 郭亚洁, 刘畅
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9458
选煤厂典型设备控制原理分析
徐志勇
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9459
建筑工程造价影响因素及造价控制措施
曹婷
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9460
国土空间规划视角下老城区更新策略研究
毛青竹
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9461
建筑工程管理的现状及其控制措施研究
胡宇川
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9462
建筑工程造价超预算的原因及其控制措施
戴宇潇
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9463
地铁隧道盾构法施工全过程风险分析
蔡竟东
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9464
建筑工程管理中的创新管理模式分析
程淦
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9465
环保工程的污水处理问题分析
王叶涛, 张惠丰
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9466
风景园林工程中大树移栽的施工技术探究
李俊
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9467
论精细化管理在建筑工程管理中的应用
陈芳
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9468
配网电缆线路故障分析及其处理方法
刘慷
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9469
论绿色建筑施工管理及在建筑施工管理中的应用
马洪生
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9470
高性能混凝土中矿粉的应用及机理研究
康红奎, 哈图
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9471
全过程工程造价对建筑工程经济管理的重要作用分析
曹翠芳
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9472
绿色建筑技术在公共建筑改造中的应用研究
张腾
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9473
绿色建筑理念下建筑设计发展趋势
徐菲菲
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9474
城市深基坑分坑开挖变形影响分析
郭玉达, 杨善亮
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9475
建筑中高压输电线路电气设计问题及措施
蔡天伦
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9476
高层建筑工程项目混凝土加固施工技术研究
王利
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9477
城市规划管理对城市建筑设计的影响
刘子媛
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9478
基于环境保护视角的道路桥梁施工
刘源, 刘彦良
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9479
工民建工程地下室防水施工技术分析
王国庆
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9480
装配式建筑施工中BIM技术应用要点分析
王浩
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9481
BIM在建筑工程管理中的应用研究
王敬
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9482
绿色建筑设计理念在建筑设计中的整合与应用
杨挺
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9483
石油化工工程建设的质量控制及安全管理
孙文学
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9484
城市园林绿化智慧化管理体系建设研究
尹佳佳
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9485
解析房屋建筑工程监理质量控制的重要性及监理要点
赵先胜
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9486
房屋建筑结构加固施工技术研究
李静, 刘铁成
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9487
GPS测绘技术在工程测绘中的应用探析
钟溢文
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9488
基于全过程的建筑工程造价管理探析
王恩君
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9489
控制建筑工程造价的途径
郝琳
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9490
测绘工程中特殊地形的测绘技术分析
袁亚松
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9491
谈建筑工程造价的影响因素与降低工程造价的对策
薛亚娟
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9492
建筑工程施工阶段工程造价控制探讨
忽昕
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9493
矿山测绘中无人机技术的运用分析
朱国华
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9494
谈建筑工程监理与施工技术的相互促进
张爱伟
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9495
浅谈房屋建筑施工中钢筋混凝土结构施工技术的应用
陈兵
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9496
建筑工程质量控制工程检测技术要点分析
张圣军
Architecture Engineering and Management
|
Volume 5 Issue 8, 2023
|
PDF
DOI: 10.33142/aem.v5i8.9497
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.