Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 6, Issue 8, 2024
基于分布塑性模型钢框架极限承载力分析
廖艺菲, 黎哲, 陆华森
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13229
建筑设计与未来城市规划的互动与发展研究
李珮
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13230
谈BIM技术在建筑工程管理中的应用
李光
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13231
双层储油罐在加油站设计中的应用
宋佳, 郝哲夫, 张鹏, 牟津慧
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13232
加油站设计施工中存在的问题与对策分析
宋佳, 郝哲夫, 张鹏, 牟津慧
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13233
浅谈低能耗医疗建筑的暖通设计问题
李晨
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13234
工程造价预结算审核工作要点分析
冉晟宇
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13235
深部铜矿开采中的地质灾害与安全预警机制
陈文冬
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13236
可持续城市规划中的自然资源管理策略研究
刘鹤鸣
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13237
谈建筑结构设计技术优化的研究与应用
焦茜
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13238
浅谈电气工程及其自动化施工关键技术
张大江
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13239
建筑工程施工技术与管理创新研究
张杰
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13240
新形势下的建筑设计与城市规划探究
王云璞
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13241
测绘地理信息系统在智慧城市测绘工程中的应用
张倩
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13242
现代测绘技术在城市规划测量领域的运用
刘珊
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13243
城市规划建设中的城市工程测绘工作研究
丁旭
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13244
基层生产运行管理中的调度指挥优化研究
马磊
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13245
数控技术在汽车零件制造中的运用研究
黎桂平, 段征育
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13246
盾构隧道下穿京沪铁路施工控制措施分析
韩星辰
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13247
浅析EPC合同模式下施工阶段的工程造价控制
夏志鹏
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13248
民用机场不停航施工管理的探索与实践
刘秀斌
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13249
中小学建筑设计适应城市发展的策略研究
吴玉红, 周雅
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13250
多层振动筛筛网的张紧方法与支撑结构研究
任登科
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13251
浅谈建材产品检测管理与质量控制
谢霏, 黄秋艳
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13252
油田地面工程管道防腐施工技术应用探索
王斌
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13253
地下水对明挖车站的影响分析
陈登开, 宋宏倬
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13254
智能建筑施工技术对人力资源需求的影响研究
徐冯翔
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13255
新型墙体材料在医药洁净厂房设计中的应用
周佳策
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13256
机械设计与制造中的自动化技术分析
张家石, 苏兆胜
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13257
中小学教学楼设计中建筑消防设计的探讨
许红燕
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13258
“双碳”目标下公共建筑技术设计与实施路径
米峰
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13259
解析建筑设计中绿色建筑技术优化结合
高志
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13260
绿色建筑工程造价预算与成本控制途径研讨
王俐俐
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13261
石油化工管道焊缝缺陷在线修补技术分析
刘涛
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13262
基于利用数字化手段展示国家级非物质文化遗产的实践与研究
陈娇, 罗竹茜, 冯雪健
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13263
谈建筑电气工程中的智能化技术应用
王科峰
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13264
保留乡土文化的民宿建筑设计方法研究
陈丽群
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13265
浅析工程项目投标文件商务编制要点及注意事项
杨微
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13266
盾构顶管施工技术在市政桥梁隧道工程中的应用
安缘彦
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13267
市政工程施工管理现状及改进的措施
张明明
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13268
对影响建筑工程测量质量若干因素的分析
赵嘉文
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13269
林业工程中的园林苗木培育及移植造林技术分析
靳彦萍
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13270
建设项目工程中甲方管理的关键点
靳忠理
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13271
顶管技术在市政给排水施工中的有效应用探究
王震
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13272
探析园林施工景观搭配与养护管理措施的运用
夏佳萍
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13273
浅谈水利工程造价管理中存在的问题及建议
江夏怡
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13274
高大模板建筑工程的施工技术与质量控制要点
郑鹏象
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13275
环保工程中污水处理工艺及方法研究
卢雪枫, 齐国林, 刘向薇, 徐乙, 杨健
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13276
高速公路桥梁施工管理问题及解决措施
杨霞燕, 黄磊
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13277
高速公路与桥梁工程施工预应力技术的实践应用研究
杨霞燕
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13278
建筑工程造价的影响因素与降低工程造价的对策探究
贾小侠
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13279
移动荷载作用下隧道施工动态响应分析
叶帅, 邹佳旺
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13280
基坑开挖对临近建筑物影响的数值分析
刘彦辉, 姜硕
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13281
关于新时代建筑工程质量安全监督的措施探究
覃健华
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13282
电气工程及自动化的质量控制与安全管理
管艳
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13283
浅谈道路桥梁工程的常见病害与施工处理技术
胡艳辉
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13284
建筑施工企业安全管理问题与对策研究
刘照伟
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13285
中国多民族聚居地建筑语境中的门窗设计比较研究
李介文, 张宝发, 崔虎杰
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13286
EPC项目工程造价管理研究和实践
陈杰群
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13287
山区高速公路互通式立交设计方案探讨
郭涌
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13288
公路工程机械施工技术和安全管理要点分析
李峰
Architecture Engineering and Management
|
Volume 6 Issue 8, 2024
|
PDF
DOI: 10.33142/aem.v6i8.13289
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.