Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 4, Issue 12, 2022
关于山区公路隧道设计的研究分析
董超
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7517
油藏开发地质勘探的常见问题分析
赵敏
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7518
BIM技术在机电工程施工阶段的应用研究
杜积春
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7519
钻孔灌注桩技术在房建工程施工中的应用
朗德山, 薛松, 李鸿德
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7520
建筑工程造价预算控制要点及其的把握
王宏鹏
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7521
GIS在矿山地质工作中的应用
冶玉海
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7522
关于机电设备安装工程施工技术管理的探讨
杜积春
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7523
浅析信息化技术在机电设备安装工程中的融合应用
吴佳
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7524
BIM技术在建筑机电设备安装工程中的运用研究
吴佳
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7525
不良地质对地铁盾构施工的影响分析
雷宏军
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7526
试论地质矿产勘查的方法及防护措施
赵庆宇
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7527
水利工程运行管理工作现状及应对策略
刘军
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7528
浅谈装配式建筑工程管理的控制要点与措施
牛智辉
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7529
现代测绘技术在矿产测量中的应用
马正强
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7530
浅谈生态修复技术在农田水利工程中的应用
马晓文
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7531
浅析关于矿物制样与化验分析的方法
金朝波
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7532
对现代测量技术在地质矿产工程测量中的应用讨论
张治文
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7533
矿石化验处理分析
李荣芹
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7534
浅谈垃圾库(池)工程脚手架施工安全专项措施
李瑞红
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7535
风雨对于建筑外墙面层脱落影响的研究
刘晨, 杨彤, 孙王虎
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7536
环境监测对环境工程建设的促进作用研究
哈布旦•居马太
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7537
基于生物质废弃物为原料的建筑材料研究
孙王虎, 孙誉宁, 许立, 张源, 马鑫
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7538
公路工程水泥试验检测中常见细节问题分析
吴海
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7539
市政桥梁工程中现浇箱梁施工技术
许洋
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7540
影响建筑工程预结算的因素和控制策略解析
刘小丽
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7541
SiO2含量对一种铜锡摩擦材料的摩擦学性能影响
周亚军, 陈亚枫, 王浩瀚
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7542
电厂锅炉检修中的问题与对策分析
朱奔, 周成
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7543
建筑工程测量技术在实际应用中存在的问题及应对策略
莫合买提•莎拉汗
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7544
油田机械设备电气自动化技术应用
魏利峰
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7545
从城乡规划到国土空间规划的转变与发展
华鑫
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7546
建筑施工安全管理现状及其对策研究
李明
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7547
论精细化管理在房建工程施工管理中的应用
赵李洋
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7548
建筑岩土施工工程项目中的注浆技术探究
张加男, 李晨光
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7549
公路工程项目施工中的成本管理及其控制
武永辉
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7550
压力管道焊接缺陷成因及对策
谭浩
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7551
石油化工管道安装问题和质量控制分析
胡运
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7552
土建桩基工程施工及检测要点
陈益
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7553
对软岩矿井巷道掘进顶板支护的探讨
张吉虎
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7554
下伏溶洞对地下开挖稳定性影响的数值模拟研究
李凌宜, 周宇, 吴森迪
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7555
建筑装饰装修工程的施工质量控制及管理
姜威任
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7556
公路路基与桥梁工程施工中的质量管理
巴海龙
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7557
职业卫生检测现场采样过程中的质量控制
丁若恒
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7558
高层住宅土建工程造价影响因素及措施
王帅
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7559
气化框架基础大体积混凝土施工技术实践与探讨
王昌盛
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7560
超高层建筑暖通空调系统的设计原则探究
田洋
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7561
浅谈洁净厂房施工质量控制措施分析
吴建新, 孙泓, 马起昌, 南松北, 马钊辉
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7562
煤矿巷道掘进施工及顶板支护技术研究
白锋
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7563
环保节能新技术在垃圾焚烧发电厂建设中的应用
汪顺建
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7564
浅谈城市更新中桩基工程的施工技术
冯英凡
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7565
沥青混凝土路面施工技术在市政公路建设中的应用
张崇强
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7566
建筑工程管理及工程施工质量的有效控制解析
杨利会
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7567
港口集装箱起重机模拟训练系统设计分析
龚振华
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7568
建筑工程施工技术和现场施工管理分析
李春玲
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7569
反硝化脱氮在污水深度处理的运行控制要点
吴昭东
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7570
基于交流变频调速的浮式起重机负载均衡控制
黄利锋
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7571
造价管理和土木工程预算的问题研究
李亚楠
Architecture Engineering and Management
|
Volume 4 Issue 12, 2022
|
PDF
DOI: 10.33142/aem.v4i12.7572
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.