Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 6, Issue 6, 2024
建筑工程管理技术的控制要点和改进对策研究
朱春雨
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12013
建筑工程施工技术及其现场施工管理措施解析
买买提•古丽娜尔
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12014
目标成本管理应用于企业经营管理中的方法探索
王一帆
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12015
基于绿色施工理念的建筑工程管理创新模式分析
娄丽
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12016
浅谈市政道路风积砂路基施工技术
肖琳
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12017
谈BIM在暖通工程设计施工中的问题及优化方案
李振宇
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12018
热回收技术在建筑环境与设备工程中的应用
孙彬
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12019
高层建筑给排水及消防设计要点及存在的问题
马莉婷
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12020
道路与桥梁工程中质量问题研究及处理
郑国栋
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12021
建筑规划设计在城市建设中的构建研究
赵文
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12022
可持续发展视角下的城市桥梁设计与管理
高红娜
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12023
建筑工程造价全过程控制中存在的问题及对策
秦平
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12024
大数据背景下工程造价信息资源共享研究
姜银娟
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12025
基于卫星遥感的国土空间监测理论与应用
梁丹丹
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12026
国土测绘工程中的测绘新技术应用分析
甘静珍
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12027
谈建筑设计中绿色建筑设计理念的应用
冯晨
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12028
低碳理念在建筑设计中的体现
周博
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12029
建筑工程EPC合同风险分析与对策研究
操双春
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12030
高速公路项目全过程成本控制与管理措施探究
曾八琳
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12031
城市地下管线探测研究进展与发展趋势
霍晓龙, 李井侠, 史晓琳, 刘勇
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12032
预制装配式混凝土(PC)结构施工技术浅探
邹鹏
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12033
装配式混凝土建筑施工技术及质量控制分析研究
杨明礼
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12034
论市政工程施工质量的影响因素及质量控制
毛道飞
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12035
市政工程施工质量的影响因素及质量控制
王佩
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12036
探讨建筑工程造价预结算审核工作的要点
汪丹
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12037
全过程工程造价在现代建筑经济控制中的重要性分析
王洁
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12038
浅谈道路桥梁路基施工技术的应用分析
林飞
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12039
无人机实景三维模型在历史建筑保护测量中的应用
刘勇
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12040
爆破开挖作用下隧道围岩振动响应特征研究
衣忠强
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12041
软弱围岩隧道爆破开挖施工工艺研究
王磊
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12042
测绘地理信息在自然资源管理中的运用
哈山•卡玛力
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12043
建筑工程招投标中合同管理的优化路径
杨达
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12044
公路工程施工中路基加固处理的工艺与技术研究
何学伟
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12045
房屋建筑工程结构加固改造技术的应用分析
齐鑫
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12046
软土地基处理技术在岩土工程中的应用分析
田晓哲
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12047
园林施工管理与后期养护在园林工程中的重要性
周爱娇
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12048
预制桩基桩岩土工程施工技术
赵浩
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12049
论建筑工程造价预结算审核工作要点
张双双, 侯娅婷
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12050
预制桩施工中的若干环境岩土工程问题
李治良
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12051
预制桩基桩岩土工程施工技术及措施
李迎
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12052
浅谈房屋建筑结构设计中的常见问题及对策分析
唐玉春
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12053
绿色建筑工程管理中存在的问题与措施研究
姜武
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12054
土木工程建筑施工技术及创新分析
冯海燕
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12055
建筑施工中防水防渗施工技术的探析
宋美官
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12056
浅谈建筑施工管理中的信息技术应用
刘亚
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12057
工程造价预结算审核工作要点分析
刘静
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12058
灌注桩后注浆施工技术在建筑工程施工中的应用探究
陈静
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12059
建筑工程造价中存在的问题与对策分析
廖觉
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12060
新型建筑环保材料在建筑节能保温中的应用分析
范伟
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12061
建筑设计与园林景观设计的融合探讨
仵晓博
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12062
框架结构设计在建筑结构设计中的应用研究
冯晓晖
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12063
不规则高层建筑结构设计要点分析
许林杰
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12064
房屋建筑设计中的节能环保问题分析
周昆
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12065
建筑构造技术的玻璃幕墙节能策略分析
张俊清
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12066
市政公路工程沥青路面施工现场试验检测技术
刘登高
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12067
高精度半导体厂房暖通空调系统浅析
余川
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12068
建筑工程项目施工进度管理质量提升措施探究
张伟鹏
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12069
公路工程施工技术管理及养护措施探析
周坤
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12070
公路工程施工阶段的成本控制与优化策略研究
王丽
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12071
土木工程设计工作的安全性与经济性的探讨
张哲
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12072
土木工程建筑结构设计中的问题与对策分析
杨汉
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12073
新时期的工程造价管理创新新思路
李治燕
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12074
工程测绘中无人机的遥感测绘技术的应用
郭晓峰
Architecture Engineering and Management
|
Volume 6 Issue 6, 2024
|
PDF
DOI: 10.33142/aem.v6i6.12075
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.