Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 4, Issue 7, 2022
建筑工程外墙施工管理探讨
孙涛
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6399
提高建筑机电工程项目安装管理水平的有效措施
王禄帮
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6400
机电机械设备维修保养的问题及解决策略探析
尤茂泰
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6401
城市隧道爆破振动下建筑物的损伤机理及减振控制研究
刘鹏
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6402
浅析高层建筑施工现场现浇混凝土质量控制
江洪
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6403
山区公路陡坡路堤滑移破坏治理方法探讨
廖家友, 郭强
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6404
数字测绘技术在建筑工程测量中的应用
邹秀芳
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6405
冲击地压煤层大直径钻孔卸压技术及实践应用
陈志强
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6406
唐山矿Y392综放工作面液压支架安装工艺研究
陈志强
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6407
永磁同步电机无位置传感器控制技术研究
张可心, 朱云雷, 王雷, 韩旭帅, 田继萍
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6408
基于动态换向策略的开关磁阻电机控制方法
韩旭帅, 田继萍, 王雷, 张可心, 朱云雷
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6409
建筑工程施工阶段的造价研究
王俊秋
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6410
建筑电气节能设计探讨
鞠礼祺
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6411
加强建设方工程管理措施及创新的研究
王睿
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6412
超长距离TBM隧洞施工中轴线控制
李国涛
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6413
建筑施工现场扬尘污染问题及治理措施探究
肖峰
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6414
BIM技术在高速公路施工管理中的应用
何强强
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6415
绿色高性能混凝土材料的研究
赵建新
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6416
节能减排汽车驾驶技术浅析
王生亮
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6417
装配式施工技术在建筑施工中的应用
李攀
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6418
论述农村公路沥青路面病害及养护施工技术
侯晓旭
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6419
建筑工程测量技术应用与质量控制研究
刘飞
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6420
房屋建筑施工中的节能环保技术探讨
刘岳, 李福林
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6421
环境监察效能的提升要点解析
刘彦丽
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6422
建筑项目管理存在的问题及对策探讨
陈洪斌
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6423
地基处理技术在房屋建筑工程施工中的运用探讨
陈学明
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6424
山区普通干线公路上边坡滑塌方案浅析
张靖, 崔菲
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6425
论楼宇自动化控制系统设计解决方案
林叶峰
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6426
针对建筑施工技术管理存在的问题和优化措施分析
严玉竹
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6427
探析全过程造价审计模式下的工程造价控制
陈杰群
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6428
简谈公路沥青路面病害及防治措施
崔菲
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6429
高层房屋建筑结构设计中的结构设计研究
孙晓丹, 王兆东
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6430
浅析化工设备安全管理的现状及应对措施
张世顺, 张永军
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6431
化工工艺中节能降耗技术应用与优化策略
张永军, 张世顺
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6432
道路施工过程中的路基路面质量控制研究
郑帅
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6433
改扩建公路路基路面设计优化措施分析
陶诗林
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6434
硅片涂胶及软烘自动设备的研究
詹玉峰, 陈跃骅, 方勇华, 方小明, 赵纪平
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6435
探析钢结构建筑的防火保护和防火涂料的消防监督
赵福康
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6436
建筑电气安装工程的成本管理和成本控制探讨
吴迪
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6437
试论建筑工程经济在工程管理中的应用
童强
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6438
优化建筑施工安全的技术对策
李靖
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6439
建筑幕墙密封胶设计应用技术及存在问题探讨
范一菁
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6440
市政道路施工中路基路面压实技术分析
马骏
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6441
测绘技术在土地整理中的问题及举措
达瓦骄
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6442
试论普通混凝土的质量控制
刘晓利
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6443
绿色施工在建筑工程中的应用研究
史少杰
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6444
混凝土建筑材料试验检测及质量控制措施
梁建东
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6445
建筑工程项目行政审批流程及要点分析
谢志新
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6446
浅谈建筑工程的质量安全管理
徐斌文
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6447
论园林绿化养护技术要点与养护管理措施的探讨
唐荧斌
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6448
建筑企业施工项目成本分析与成本控制管理
李娟
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6449
市政管网给排水管道系统工程施工的质控对策研究
骆公柳
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6450
关于绿色节能建筑工程在社会中的广泛应用措施及浅析
魏琴
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6451
浅析项目的工程变更与索赔管理
李鹏
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6452
混凝土装配式住宅建筑施工技术优势
李学松
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6453
浅析路桥施工中预应力技术的应用
田志力
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6454
基于低碳绿色理念的城市建筑设计研究
潘睿
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6455
热力暗挖隧道工程超前注浆加固技术
庞炳涛
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6456
建筑工程深基坑支护施工技术研究
单英鸣
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6457
电力土建地基施工技术分析
匡明珅
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6458
水利工程施工中的导流问题及技术研究
王吉伟
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6459
提高市政供热系统工程水平的技术探讨
张立斌
Architecture Engineering and Management
|
Volume 4 Issue 7, 2022
|
PDF
DOI: 10.33142/aem.v4i7.6460
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.