Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 6, Issue 9, 2024
柴油加氢高压换热器结垢的原因分析及解决措施
王静
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13821
基于材料选用和温度监测的大尺度混凝土构件跳仓法施工的裂缝控制技术
毕英伟
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13822
建筑工程中的暖通空调节能技术应用探讨
徐兴宁
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13823
环保节能理念在建筑给排水设计中的应用
邢梦旋
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13824
建筑暖通工程施工要点及质量控制措施
田东兴
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13825
高层建筑结构设计中的不规则问题与抗震方法探究
卢永亮
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13826
基于信息化背景的土木工程施工质量检测
刘贤贤
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13827
新型测绘技术与地理信息系统在工程测量中的应用
张煜
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13828
公路工程施工中强夯处理技术的应用
邵勇军
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13829
路基施工技术在农村公路施工中的运用
潘存彬
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13830
南昌地铁深基坑开挖数值模拟与方案优化研究
袁红, 纪承伟业
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13831
国际工程项目管理的发展趋势与应对策略探讨
徐大雷
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13832
建筑工程管理中工程造价预结算审核的应用探讨
李嘉龙
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13833
基于BIM技术的建筑工程安全管理分析
梁艳丽
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13834
传统光伏发电工作项目档案管理的数字化转型分析
张娜
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13835
地铁明挖车站BIM三维建模及信息集成技术应用
张晗秋, 邹佳旺
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13836
BIM技术在工业建筑暖通设计中的应用研究
王艳敏
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13837
建造源于制造,精益始于设计
高鹏云, 汪江华
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13838
基建投资项目前期管理关键点及把控对策
杨天琦
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13839
住宅外墙保温装饰一体板施工技术
郭鹏
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13840
数字城市规划视角下智慧城市的创新研究
韩蕾
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13841
道路桥梁沉降段路基路面施工研究
张芮境
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13842
基于大数据技术的建筑施工有限空间安全智能报警系统设计研究
迟白冰, 战勇, 侯慎杰, 李勋, 张项宁
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13843
水利工程中灌注桩施工质量监管方面的问题与对策研究
杨洁
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13844
浅谈市政路桥施工中防水路基面的施工技术
徐波涛
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13845
地铁车站基坑开挖施工自身稳定性分析
杨春华, 姜硕
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13846
列车荷载下管片背后含空洞盾构隧道结构动力响应研究
徐波, 邹佳旺
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13847
隧道注浆范围对地层沉降及桥桩位移影响分析
付涵露, 赵洪尧
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13848
市政管道深基槽开挖工程中的钢板桩支护技术研究
凡春强
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13849
风冷热泵与地源热泵系统耦合技术应用与分析
赵凯辉
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13850
大数据视角下建筑施工智慧管理研究
孔庆于
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13851
建筑设计中的文化因素与地方特色的体现
王政皓
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13852
建筑工程机电设备安装施工的现场管理探讨
黄宏伟
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13853
BIM技术视角下精细化工程造价管理研究
王一琳
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13854
基于房地产项目精益化快开盘运营管理探析
彭建军
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13855
机电工程技术应用及其自动化问题分析
李清泉
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13856
工程机械设备故障诊断与预测维护
张少钰
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13857
低碳理念在城市园林景观设计中的应用
郑晓倩
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13858
谈大数据在当代风景园林设计中的应用
王兴科
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13859
建筑工程造价预算控制要点及策略探讨
郑书娟
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13860
乡村景观元素在风景园林规划设计中的融入
齐佳欢
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13861
水利工程施工中的成本管理与优化策略比较
邓英
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13862
可持续发展视角下的市政建筑与道桥工程材料选择与应用研究
孙海燕
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13863
房屋建筑和市政基础设施工程质量监督管理解析
牟广庆
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13864
水利工程施工项目管理中的关键成功因素分析
杨立丽
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13865
GNSSRTK技术在建筑工程测量中的应用及其对策研究
贺轩昂
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13866
建筑工程项目施工进度管理要点研究
申华
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13867
建筑工程造价的动态管理与控制分析
侯蕾
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13868
针对建筑工程施工阶段安全控制方面探讨
闫兆峰
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13869
软土地区双侧深基坑施工对邻近地铁车站及盾构隧道变形影响的分析
林轶凡
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13870
新时代背景下市政道路桥梁工程的施工管理的分析
张建
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13871
BIM技术在建筑设计的应用研究
张海龙
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13872
试论故障诊断技术及监测方法在建筑电气系统上的应用
王佳勋
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13873
高速公路与桥梁过渡段施工技术探讨
黄磊, 杨霞燕
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13874
建筑物对盾构施工的稳定性影响研究
刘彦辉, 宋宏倬
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13875
探讨建设项目全寿命周期内工程造价的投资控制
王琪
Architecture Engineering and Management
|
Volume 6 Issue 9, 2024
|
PDF
DOI: 10.33142/aem.v6i9.13876
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.