Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 4, Issue 9, 2022
关于公路工程施工质量控制与管理问题分析
崔菲, 张靖
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6901
探析土木工程造价控制环节的要点
于珍珍
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6902
土木工程造价中预结算审核工作要点的思考
吴姣
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6903
市政建筑工程质量与施工技术管理措施研究
韩六三
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6904
节能低碳技术在污水处理中的应用
沈建
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6905
环保工程中污水处理工艺及方法探究
金超
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6906
公路软土路基施工处理技术探究
魏世洲
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6907
大型装配式厂房大截面钢筋混凝土柱预制控制技术
李杨
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6908
绿色施工技术在市政建筑装饰工程中的应用
韩六三
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6909
浅谈建筑工程管理的制约因素及应对措施
刘继远
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6910
机电安装工程的管理与成本控制分析
孔荷香
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6911
水利工程中水闸施工工艺要点及施工质量控制分析
白新平
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6912
路基路面拼接施工技术在公路改扩建工程中的应用
胡斐
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6913
生态理念下现代城市园林景观设计的重要性分析
尉晓黎
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6914
论房屋建筑工程施工技术及现场施工管理方法
刘俊
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6915
建筑工程技术管理及节能减排实施策略
李越
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6916
建筑施工图审查及设计中常见问题研究
卢静静
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6917
智慧工地在建筑工程安全管理中的应用
赵勇
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6918
浅谈建筑装饰装修工程设计施工一体化策略
唐怀宇
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6919
园林景观工程的施工管理特点及质量控制
王春波
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6920
生态园林景观设计中植物配置探讨
陈瑞杰
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6921
路桥施工中软土路基施工技术要点探究
讷经纬
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6922
浅谈道路桥梁工程存在的质量问题及管理措施
杨伐
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6923
试论建筑工程招投标问题及对策
张思远
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6924
试析建筑工程概预算编制对工程造价的影响
马海涛
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6925
国土空间规划视角下的美丽乡村规划探析
王佃云
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6926
论在建筑工程项目管理中的施工现场管理与优化措施
蔡振松
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6927
矿山测量在煤矿安全生产中的作用及发展趋势
张波
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6928
工业固体废弃物现状和处理对策
王小杰
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6929
房屋建筑工程中施工质量控制及施工安全管理探讨
蔡振松
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6930
高层建筑创优施工现场管理的特点与控制策略
陈志涛
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6931
建筑工程中土建施工现场管理的优化策略
李晨旭
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6932
基于BIM的安全管理问题的研究
张晶
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6933
市政工程施工质量管理中存在的问题和对策
沈俊杰
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6934
对建筑工程招投标及评标方法的思考
徐艺萌
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6935
建筑工程中施工技术及现场施工管理的探究
陈志涛
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6936
论房屋建筑工程施工管理与质量控制思路探析
王庆峰
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6937
水利工程施工管理的现状及对策探讨
石蕊
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6938
BIM在建筑工程施工管理中的应用分析
刘振民
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6939
土建施工管理中流水施工技术的应用分析
刘蕴籍
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6940
全过程造价咨询服务的重点分析和建议
侯蕾
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6941
浅谈全过程管理模式在工程项目中的应用
田帝
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6942
浅析中国养老建筑的发展历史以及现有问题
程小桐, 金光虎
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6943
建筑项目的造价咨询管理及全过程成本控制策略
宫敏
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6944
房地产测绘的质量控制及其实现路径
董方山, 杨甲芳
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6945
影响建筑工程造价的因素及降低建筑工程造价措施
王磊
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6946
乡镇国土空间规划在国土空间规划体系中的意义
罗科
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6947
建筑工程施工阶段的工程造价管理要点分析
张文利
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6948
监理对房建暖通施工质量常见问题及措施控制
何光宏
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6949
危险化学品企业的安全管理探讨
王雅峰, 李睿哲
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6950
采矿工程现代化工艺技术探讨
李传标, 惠平
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6951
机电安装在建筑工程中的施工与管理探索构架
陈金星
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6952
TDS智能干选硐室大断面围岩变形规律研究
段玉锋
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6954
寒冷地区建筑消防给水设计中存在的问题探讨
陈冰雁
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6955
基于不同老龄人需求差异的养老环境设计研究
朴希珠, 金光虎
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6956
被动式建筑节能设计技术策略研究
张黎明
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6957
新形势下城市园林绿化工程技术与应用探讨
刘祥军, 郭静, 李建华, 张楠, 李晓华
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6958
信息化在煤矿机电设备运行与维护管理中的应用
张健
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6959
水利工程施工安全与质量管理中常见问题及解决措施
郭金锋, 郭嘉琪
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6960
建筑工程项目管理重点研究
丁利芝, 王涛
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6961
试论项目管理在建筑工程管理中的重要作用
牛朋英
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6962
地下工程机电安装工程中BIM技术的应用
康抗, 孙月, 田自龙, 杜韬, 吕佼佼
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6963
有效提升建筑工程施工技术管理水平的方法
田立慧, 魏继巍
Architecture Engineering and Management
|
Volume 4 Issue 9, 2022
|
PDF
DOI: 10.33142/aem.v4i9.6964
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.