Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 6, Issue 2, 2024
建筑工程质量控制中的工程检测工作探讨
杨晓晖
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10977
海绵城市建设下的城市道路排水优化设计研究
孙龙龙, 刘新江
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10978
探析信息化在建筑工程管理中的应用
郜辰萌
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10979
强化路桥施工技术与安全管理的可行性建议
李银江
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10980
路桥施工项目成本管理方式及措施
廉霞
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10981
悬臂挂篮技术在桥梁施工中的应用分析
李伟
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10982
无人机摄影测量技术在数字化地形测量中的应用
戈碧
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10983
论建筑工程设计施工中精细化标准管理探究
李肖颖
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10984
建筑电气设计中的消防设计要点研究
彭康
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10985
建筑防火技术在民用建筑设计中的应用探讨
王建飞
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10986
绿色建筑设计思路在设计中的应用
王彦雨
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10987
低能耗建筑中的被动式暖通设计原则与方法
梁建涛
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10988
城市更新中的景观生态规划策略
刘慧敏
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10989
房屋建筑施工中铝模施工技术和现场施工管理剖析
唐文
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10990
市政桥梁工程中预应力施工技术的应用
郑宝杰
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10991
浅析市政工程施工中地下管线的保护问题
靳慧芳
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10992
公路桥梁工程施工中伸缩缝施工技术探究
李涛
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10993
市政道路施工安全管理的有效策略
黄慧
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10994
市政工程给排水管道施工质量控制措施研究
皇甫侨俪
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10995
公路工程路基路面压实机械施工技术措施探讨
曹廷龙
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10996
论沥青混凝土摊铺机施工技术工艺
郝亚芳
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10997
市政道路桥梁工程中关于沉降段路基路面的施工技术的研究
段文辉
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10998
节能建筑中的被动式暖通技术应用
胡向楠
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.10999
数字时代城市更新及建筑设计策略
牛壮
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11000
防渗漏施工技术在房屋建筑施工中的运用探析
唐文
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11001
BIM技术在工程造价成本管控中的应用探究
童启瑛
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11002
基于住宅建筑无障碍设计要点的研究
王娜
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11003
房屋建筑监理的操作要点以及实施探析
李芳斌
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11004
建筑设计中的绿色建筑设计理念及要点分析
王丽娟
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11005
土木工程结构设计中存在的问题及策略研究
赵阔
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11006
建筑合同管理在工程造价中的重要性及应用分析
杨静
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11007
新型节能设计理念在建筑暖通设计中的应用
程二雷
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11008
建筑设计中的绿色建筑设计应用
景叶飞
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11009
桥梁设计及桥梁结构损坏原因及处理
王晓丽
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11010
浅析房屋建筑监理的操作要点及实施
王丹丹
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11011
建筑土建施工中建筑监理的作用及优化措施
史伟
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11012
房屋建筑监理质量控制的必要性及监理要点探析
金云安
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11013
关于海绵城市理念在市政给排水设计中的运用探析
宋瑶
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11014
工程管理中建筑工程经济的应用研究
韩琴
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11015
论市政工程建设中的地下管线施工
赵坤
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11016
绿色建筑给排水设计的节水措施探析
冯敏
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11017
建筑结构设计技术优化的研究与应用分析
李玉爽
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11018
建筑给排水设计中的节能减排设计探究
王丽, 崔路遥
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11019
建筑给排水设计与施工技术探讨
崔路遥
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11020
谈建筑工程框架剪力墙结构工程施工技术
张卫
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11021
工程设备物资采购管理风险分析与应对措施研究
汪娇
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11022
建筑工程检测中无损检测技术的应用分析
陈玉芹
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11023
路桥施工企业的财务管理及成本控制问题思考
苗德武
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11024
道路桥梁工程造价的影响因素与控制措施
朱张浩
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11025
建筑工程管理工作中全过程造价控制应用研究
沈旦
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11026
高层建筑人防工程结构设计分析
魏明兴
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11027
市政施工中水泥稳定碎石基层施工技术的研究与实践
王强
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11028
市政施工中路面裂缝的控制方法
刘昭
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11029
钢板桩支护施工技术在市政道路施工中的应用
廖广丽
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11030
防水防渗施工技术在建筑工程施工中的应用
李勇
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11031
市政工程环保型施工与管理分析
李凡, 陈潇
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11032
建筑机电安装工程的施工进度管理研究
王湘玺
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11033
房屋建筑结构设计中优化技术应用探析
柳坤
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11034
浅谈土木工程道路桥梁施工技术要点分析
李伟
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11035
论工程造价超预算原因和控制措施研究
赵东亮
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11036
建筑工程灌注桩后注浆施工技术应用分析
李艳双
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11037
测绘领域中遥感图像处理技术的应用研究
孔令尧
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11038
全过程工程咨询投资控制应用研究
操双春
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11039
建筑工程造价的动态管理及实施策略探讨
徐立明
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11040
双重预防机制化工安全管理创新模式
王相栋, 刘恩明, 赵园园
Architecture Engineering and Management
|
Volume 6 Issue 2, 2024
|
PDF
DOI: 10.33142/aem.v6i2.11041
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.