Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 5, Issue 3, 2023
化工安全管理中存在的普遍问题和对策研究
王洋
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8160
新时期矿山测绘工程测量技术的发展与应用分析
高景国
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8161
建筑工程造价预算控制的要点分析
谢丽丹
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8162
建筑工程造价超预算的原因及控制策略
陈皓
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8163
真空预压膜下真空度异常处理方法研究
郭杨子
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8164
浅谈桥式起重机啃轨问题
张兵, 高强
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8165
暖通空调技术发展现状与对策分析
赵起超, 董婷
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8166
浅谈BIM技术在房地产项目中的应用
陈建军
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8167
浅谈化工智能自动化仪表技术与应用
唐军锋
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8168
深基坑的支护设计与岩土勘察技术探讨
董淑科
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8169
岩土工程施工中深基坑支护问题的分析
董淑科
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8170
论节水灌溉水利工程施工技术研究
张国霞
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8171
沥青混凝土施工技术管理及公路养护措施分析
许宝辉
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8172
GPS测量技术在路桥工程测量中的应用与发展趋势
关晓军
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8173
建筑工程预算在建筑施工企业工程造价控制中的作用
郭斗月
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8174
城市老旧住宅小区提升改造现状与策略分析
康茹雯
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8175
市政道路工程管理中质量管理与进度管理
郭鲜艳
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8176
中央空调机房的施工与验收问题探
李宝龙
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8177
高速公路桥梁现浇箱梁支架施工技术分析
王昱坤
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8178
叠合板与现浇板接缝处模板安装施工的研究
任建双
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8179
建筑电气工程设计中的常见问题及对策分析
李天磊
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8180
房屋建筑结构设计中的现浇混凝土裂缝控制分析
冯希庆
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8181
建筑工程造价控制管理过程中的问题及对策
张健, 谢丽丹
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8182
市政工程中的沥青砼道路施工工艺分析
张倩
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8183
现代工程建设领域中绿色建筑技术的应用
王存芬
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8184
桥梁空心薄壁高墩翻模施工技术研究
陈锦文
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8185
公路桥梁涵洞隧道工程施工技术
刘文忠
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8186
无人船在盘锦沿海滩涂测绘中的应用
庞宇
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8187
房屋建筑工程渗漏原因与防渗漏技术应用研究
邹友文
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8188
燃气锅炉的节能运行与控制技术探析
宗成远
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8189
建筑工程土建施工中桩基础施工技术的应用
饶刚
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8190
钻探技术在地质勘察工程中的应用研究
张也, 田磊
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8191
建筑工程管理中BIM技术的应用研究
陈健
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8192
公路桥梁隧道存在质量问题及有效试验检测措施
邱雪冰
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8193
沥青混凝土路面裂缝成因及防治措施
王昱坤
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8194
节水节能技术的建筑给排水设计研究
霍力光
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8195
建筑工程施工管理中精细化管理
王冠雄
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8196
水泥粉煤灰碎石桩复合地基及其应用
董淑科
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8197
道路桥梁施工中路面防水处理技术研究
刘波
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8198
道路桥梁施工中的软土地基处理技术要点
续波
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8199
建材检测管理存在的问题及改进措施
马军福
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8200
桥梁建材检测中混凝土钢筋锈蚀检测的重点
孙繁玉
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8201
建筑建材质量检测工作的必要性和关键点
王文华
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8202
公路桥梁沥青路面接缝施工技术探讨
康超
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8203
钻孔灌注桩施工技术在公路桥梁施工中的应用探析
贺兴
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8204
强化房地产市场管理 推动房地产经济发展
安光亚
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8205
土木工程施工中混凝土结构的施工技术
黄志杰
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8206
煤矿巷道支护与快速掘进技术探讨
赵烨
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8207
浅谈建筑工程施工要点及现场施工管理
朱长青
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8208
市政工程中道路排水管道施工技术要点分析
刘宝琨
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8209
路桥施工中钢纤维混凝土施工技术应用分析
杨永炎
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8210
煤矿液压支架结构件的焊接工艺探讨
李松竹, 张玉宝, 黄维康
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8211
建筑工程造价控制管理过程中的问题和措施研究
王宇
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8212
矿山机电自动化控制技术应用研究
王行
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8213
关于国际工程管理模式的思考
吴晓丽
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8214
自然资源地表基质调查技术体系构建
姜鹏
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8215
节能环保技术在土木工程施工中的应用
张震
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8216
机电工程施工技术及质量管理探讨
范文亮
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8217
地球物理勘探及钻探在矿产勘查中的应用与分析
孙茂鑫, 宋海伟
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8218
地质找矿方法与地勘技术的创新及其应用的探析
董凯, 佟磊
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8219
复杂市政工程人员实时定位考勤设计与实现
张虎
Architecture Engineering and Management
|
Volume 5 Issue 3, 2023
|
PDF
DOI: 10.33142/aem.v5i3.8220
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.