Architecture Engineering and Management

Introduction

Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by authoritative websites such as CNKI and CQVIP etc.

Policies

Open Access Policy

This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.

Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND):

Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.

Copyediting and Proofs

Manuscripts must be written either in good American or British English, in a clear language, correct punctuations, and consistent style throughout the manuscript. Authors are advised to send for professional English language editing service before submission. (Viser Manuscript Submission Template)

Editorial Policies

Peer Review

Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.

All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).

All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.

Ethical Approval of Studies and Informed Consent

For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.

The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.

The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.

Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection

Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.

Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.

Publishing Ethics

Publishing Policies

Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).

The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical JournalsEditors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).

ISSN

ISSN: 2661-4413 (online)

ISSN: 2661-4405 (print)

Publishing Frequency

The publication frequency of this journal is Monthly

Editor(s)-in-Chief

杨克明	新乡北方车辆仪表有限公司	中国

Editorial Board Members

付青松	重庆通拓交通规划设计有限公司	中国
欧德功	宁波市民用建筑设计研究院有限公司	中国
丁建华	南京软件园经济发展有限公司	中国
柳洪	浙江集典建设有限公司	中国
郭腾	枣庄市建筑设计研究院	中国

Indexation

Contact

Email: viser-tech@outlook.com

Submit and Check

Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.

Latest Issue

Volume 2 Issue 8, 2020

Search

Volume 2, Issue 5, 2020

长输管道水平定向钻穿越施工技术
杨军
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2109

建筑施工安全管理防范策略分析
张丽丽
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2110

建筑工程造价预结算审计管理的有效举措
马子毅
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2111

建筑工程中混凝土工程的质量检查及处理措施
李永红
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2112

新型建筑装饰材料在现代建筑中的应用
张丽丽
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2113

室内装饰装修设计的发展趋势
陈琛
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2114

农村公路的建设、管理与养护探究
郭瑞
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2115

基于GeoStudio的堆积体滑坡渗流分析
黄厚赞, 李阳, 张国政, 米冠宇
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2116

塑料模板在城市地下综合管廊施工中的应用
刘晓飞, 胡雷嵩, 魏亚奇, 葛庆贺, 范在法
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2117

焊接螺柱断裂原因分析
申志清, 姜成利
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2118

建筑工程施工技术及其现场施工管理措施的分析
马仲元
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2119

建筑电气施工中常见的质量问题及防治的措施
郭强
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2120

浅析市政道路桥梁工程施工质量缺陷成因及防治措施
朱立来
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2121

建筑安装工程造价控制要点及措施
李富华
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2122

化工工程机械中机电一体化技术的应用
徐思鸿
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2123

对园林绿化中大树移植的关键技术探讨
李峰, 王代利
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2124

探究金属材料焊接中的缺陷及防治措施
李建飞
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2125

试论现代房屋建筑施工中绿色节能施工技术的应用
吴金锁
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2126

建筑材料检测在建筑施工过程中的重要性探讨
舒绍琼
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2127

浅谈实验室工程审计
谭志茹, 姜成利
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2128

浅析道路桥梁施工技术与管理研究
戚翠华
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2129

房屋建筑土建工程中混凝土施工技术分析
马扬
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2130

新能源汽车电机驱动系统控制技术分析
孟游
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2131

风电偏航和变桨轴承的安装与维护分析
姜薇薇
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2132

建设工程招标代理机构存在的问题及对策探讨
钮东平
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2133

格构内边坡绿化设计方案研究
蔡智渊, 褚佰超
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2134

特殊情况下基坑降水方法探讨
李占民
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2135

建筑工程施工技术及其现场施工管理措施分析
刘贤贤
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2136

探究预制装配式建筑施工技术及其配套装备的创新
何彦林, 杨佑勇
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2137

氯化法提纯金粉工艺的探究
朱延胜, 赵举峰
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2138

吹填口设置对于地基处理加固效果影响分析
朱昊明
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2139

建筑工程质量提升对策探析
赵娟
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2140

建筑给排水设计中的常见问题及处理措施
徐娟
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2141

金属材料热处理变形的影响因素与控制策略
韩永波
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2142

装配式建筑施工技术在建筑工程施工管理中的应用
张永进
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2143

浅论施工项目管理中的进度管理
邹静
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2144

空间造型钢结构测量控制要点分析
马永军, 刘力, 李玉磊
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2145

信息化背景下的建筑工程管理策略
谭志刚
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2146

数控设备维修管理要点探析
刘刚, 谭伟, 梁羽
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2147

建设单位合同管理中存在的问题和应对策略
左云
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2148

浅析高速齿式分度盘在水车式阀门专机上的应用
胡伟
Architecture Engineering and Management | Volume 2 Issue 5, 2020 | PDF
DOI: 10.33142/aem.v2i5.2149

Article Processing Charges

This journal charges an article processing charge of S$ 300.00 (Singapore Dollars)

Payment Instructions

Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.

Bank Transfer / Wire Transfer

Bank: DBS Bank Ltd
Account Name: Viser Technology Pte Ltd
Account No.: 023-906417-5
Swift Code: DBSSSGSG

Alipay / Wechat Pay

Scan the following QR code for payment

UnionPay

Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.

In your payment request email, please indicate the following information:

Author Name(s)
Article Number
Article Title
Journal Title

Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.