
Mechanical Engineering Science
机械工程科学(MES)是由新加坡Viser出版社出版的国际开放存取期刊,致力于迅速发表机械工程领域的最新研究进展和科学成果,包括工程力学、流体力学、工程材料、材料力学、燃烧、传热、热力学、摩擦学、机械原理、机械零件、金属技术和非金属技术等。MES的目的是反映机械工程的先进进展,促进学科专业化进程,并为报道和讨论有关机械工程的新闻和问题提供一个论坛。
Only original, innovative and novel papers will be considered for publication in the Mechanical Engineering Science, and before considering their work, authors are required to confirm that their paper has not been submitted to any other journal in English or any other language.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Copyediting and Proofs
Manuscripts must be written either in good American or British English, in a clear language, correct punctuations, and consistent style throughout the manuscript. Authors are advised to send for professional English language editing service before submission. (Viser Manuscript Submission Template)
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical JournalsEditors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
ISSN: 2661-4448 (online)
ISSN: 2661-443X (print)
The publication frequency of this journal is Half-yearly
Guangzhao Fan | Dalian University of Technology | China |
Xianju Yuan | Hubei University of Automotive Technology | China |
Guojin Tan | College of Communications, Jilin University | China |
Chi Ma | Chongqing University | China |
Chunguo Zhang | Chang 'an University | China |
Xiangjie Yang | Nanchang University(ncu) | China |
Jun Shao | Xi’an Shiyou University | China |
Wenzheng Wu | Jilin University | China |
Aiwu Ding | Hainan ZHONGXIANG Technology Co. Ltd | China |
Yutian Ding | Lanzhou University of Technology | China |
Junbiao Peng | Shanghai Hao Yuan Rubber Products Co. Ltd | China |
Yijie Gu | Shandong University of Science and Technology | China |
Jiangtao Li | Henan Panrui Composite Materials Research Institute | China |
Zhaoning Yang | XI'AN University of Posts&Telecommunications | China |
Jianlian Cheng | Chang'an University | China |
Daoming Wang | Hefei University of Technology | China |
Jianzhuo Zhang | Liaoning Technology University | China |
Miao Xie | Liaoning Technology University | China |
Xinle Yang | Liaoning Technology University | China |
Chuanyu Wu | Fujian Agricultural and Forestry University | China |
Linsen Shu | Shaanxi University of Technology | China |
Zhuanzhe Zhao | Anhui Polytechnic University | China |
Di Wang | Chang 'an University | China |
Simeng Liu | Chang 'an University | China |
Chaolei Huang | Chang 'an University | China |
Qi Liu | Ningxia shenzhou Tyre Co. Ltd | China |
Yan Ran | Chongqing University | China |
Haifeng Lv | North University | China |
Liaoyuan Zhang | Shenyang Ligong University | China |
Zhengying Wei | Xian Jiaotong University | China |
Qin Lian | School of Mechanical Engineering, Xian Jiaotong University | China |
Shuhai Jia | School of Mechanical Engineering, Xian Jiaotong University | China |
Yongchang Gao | Chang'an University | China |
Bo Cheng | College of Engineering machinery, Chang'an University | China |
Qi Gao | Liaoning University of Technology | China |
Chaoqun Wang | Qingdao Shuangxing Co. Ltd. | China |
Longlong Guo | Xi’an Shiyou University | China |
Guangzhao Fan | Dalian University of Technology, China | China |
Yiqi Wang | Dalian University of Technology, China | China |
Rencheng Jin | Dalian University of Technology, China | China |
Xingang Wang | Northeastern University | China |
Jingxiu Ling | Fujian University of Technology | China |
Carlos Frajuca | Federal Institute of Education, Science and Technology of São Paulo | Brazil |
Dongxiao Hou | Northeastern University at Qinhuangdao | China |
Lingyun Yao | Southwest University | China |
Jianxiong Ye | Nanchang Institute of Technology | China |
Yuanchao Deng | School of Mechanical Engineering, Hubei University of Technology | China |
Qinjian Zhang | Beijing Information Science and Technology University | China |
Daoyun Chen | East China Jiaotong University | China |
Farshid Mirzaee | Malayer University | Iran |
Belkacem Sebti | University of batna2 Algeria | Algeria |
Adil Brouri | ENSAM,Moulay Ismail University | Morocco |
Evgeny Buryi | Bauman Moscow State Technical University | Russian Federation |
Kandreegula Suresh Kumar | VECV | India |
Chunyu Zhang | University of Science And Technology of Anhui | China |
Cinzia Buratti | University of Perugia | Italy |
Fanglong Yin | Beijing University of Technology | China |
Feng Lu | Shenyang Jianzhu University | China |
Qunfeng Zeng | Xi’an Jiaotong University | China |
Hua Zhang | Wuhan University of Science and Technology | China |
Qiangxian Huang | Hefei University of Technology | China |
Fang Cheng | Advanced Remanufacgturing and Technology Centre, A*STAR, Singapore | China |
Diego Galar | Luleå University of Technology | Sweden |
Saad A. El-Sayed | Zagazig University | Egypt |
Siwen Tang | Hunan University of Science and Technology | China |
YungChun Lee | National Cheng Kung University | China |
Jing Wei | Chongqing University | China |
Qiang Jiang | Chongqing University Of Technology | China |
Zhanhua Song | Shandong Agricultural University | China |
Yi Qin | Chongqing University | China |
Jun Tian | Dongguan University Of Technology | China |
Hongbo Yan | Inner Mongolia university of science and technology | China |
Jianyong Li | Shandong university | China |
Qiang Wang | Heilongjiang Institute of Technology | China |
Guodong Sun | Hubei University Of Technology | China |
Weidong Yang | Hebei University of Technology | China |
Mingxing Lin | Shandong University | China |
Gaipin Cai | Jiangxi University of Science and Technology | China |
Wenyi Liu | Jiangsu Normal University | China |
Bing Chen | University of Science and Technology Beijing | China |
Yang Tang | Southwest Petroleum University | China |
Guorong Wang | Southwest Petroleum University | China |
Yimin Deng | Ningbo University | China |
Wenjun Meng | Shanxi Institute of Energy | China |
Youchao Sun | Nanjing University of Aeronautics and Astronautics | China |
Zurong Qiu | Tianjin university | China |
Qingshuang Chen | Jiangxi key laboratory of automobile noise and vibration | China |
Peiqi Liu | Dalian University of Technology | China |
Xiuwu Sui | Tianjin Polytechnic University | China |
Keqiu Gu | Nanjing University of Science and Technology | China |
Zhiqiang Xie | Harbin University of Science and Technology | China |
Haidong Shao | Hunan University | China |
Chun Chen | Shaanxi University of Technology | China |
Liangbo Sun | Wuhan Polytechnic University | China |
Lijuan Yu | Jilin University | China |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Volume 1, Issue 1, 2019
Computing Method of Multivariate Process Capability Index Based on Normalized Pretreatment
Guangqi Ying, Yan Ran, Genbao Zhang, Yuxin Liu, Shengyong Zhang
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.654
Design of New Elevator Pressure Guide Plate and Its Test Device
Qihang Xu, Shaoke Chen
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.655
Study on Surface Roughness in Micro Milling of Single Crystal Materials
Qi Gao, Po Jin, Guangyan Guo
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.656
Design and Selection of Servomotor for Radial Aircraft Tire Secondary Molding Machine
Chaoqun Wang
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.657
The Additive Manufacturing Process of Electric Power Fittings Fabricated by Metal Droplet Deposition
HaiHua Wu, Guangxi Zhao, Zhengying Wei
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.658
A Prediction Method for TBM Cutterhead Dynamic Tunneling Performance under Typical Composite Geological Conditions
Jingxiu Ling, Xiaojing Yang, Zhihong Wu
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.659
Optimization of the Hot Pressing Process for Preparing Flax Fiber/ PE Thermoplastic Composite
Yiqi Wang, Guangpeng Cui, Zhujian Shao, Yongjie Bao, Hang Gao
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.660
Cement Pavement Surface Crack Detection Based on Image Processing
Hongwei Lei, Jianlian Cheng, Qi Xu
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.661
Strength Evaluation of a Bogie Frame by Different Methods
Daoyun Chen, Shouguang Sun, Qiang Li
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.662
Study on Vertical Vibration Characteristics of the 2DOF Strip Rolling Mill Model with a Single Weak Defect on the Work Roll Bearing Outer Raceway
Zhengnan Sun, Dongxiao Hou, Liang Xu, Peiming Shi
Mechanical Engineering Science
|
Volume 1 Issue 1, 2019
|
PDF
DOI: 10.33142/me.v1i1.664
This journal charges an article processing charge of S$ 1200.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.