Engineering Construction
《工程建设》由新加坡Viser Technology Ptd Ltd主办,国际标准刊号:ISSN:2630-5283。本刊长期以来注重质量,编排规范,选稿较严格,学术水平较高,深受高校教师及科研院所研究人员青睐,Viser Technology Ptd Ltd官网、万方及维普网全文收录。
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
期刊针对工程项目建设的全过程,重点报道工程建设过程的科研成果、先进技术、高效设备、新型材料、工程项目管理经验等,突出工程领域新技术、新工艺、新方法,反映建筑、水电、石化等工程领域新成果、新进展,促进工程技术行业的交流与成果展示,为推动国际工程技术和科学技术发展服务。
鼓励工程建设各领域的专业技术人员和管理干部以及大专院校相关专业的师生和科研人员来稿,有关国家科技计划、自然科学基金和各种部门、地方、院所科技基金资助项目的文章优先发布。
ISSN: 2630-5283 (online)
ISSN: 2717-5375 (print)
The publication frequency of this journal is Monthly
马磊 | 博士 | 中国 |
成岳 | 中国 | |
杨高尚 | 中国 | |
吕尚辉 | 中国 | |
肖泳 | 中国 | |
游天龙 | 中国 | |
赵玉凤 | 中国 | |
黄孟军 | 中国 | |
贺海军 | 中国 | |
徐鹏 | 中国 |
Email: eng_constr@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 6, Issue 11, 2023
涔天河1#泄洪洞龙落尾施工技术研究
徐申飞
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9883
机场工程管理及水泥混凝土道面施工技术要点分析
张振华
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9884
浅析公路工程施工中沥青路面的施工技术
毕祥光
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9885
煤气化工艺闪蒸工段配套缓冲装置故障的原因分析及整改方向
高玉斌, 张镓铄, 马钊
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9886
钢铁企业给排水设计的探讨与研究
王浩
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9887
化工机械设备安装工程中的质量控制研究
周新生
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9888
关于道路与桥梁施工建设管理的技术要点分析
张士佳
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9889
预制水泥混凝土板路面结构力学分析
陈龙庭, 金坚定, 俞金龙, 徐东, 郑好瑜
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9890
地质钻探技术及在深部矿产勘查中的应用研究
钮国连
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9891
水利工程中软土地基桩基础设计与变形分析
潘元峰
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9892
道路桥梁工程造价管理与控制的对策思考
陈继强
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9893
探究土木工程管理施工过程质量与控制措施
牛治方
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9894
浅谈暖通空调设备的运行管理与维护
刘建军
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9895
高空作业平台四杆变幅机构动力学特性与操控性研究
徐运海, 楚斯铭, 何霁鹏
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9896
高压变频器在永磁同步减速电机直驱矿井提升机上的闭环矢量应用
邱战峰, 张国选, 荣凯
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9897
道桥施工路面垫层施工技术分析
谷祎君
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9898
浅析道桥施工中混凝土施工技术的应用
白龙
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9899
浅谈聚乙烯管道电熔连接过程中的易发问题及质量控制
王鑫
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9900
城市燃气工程施工及安全生产运行管理措施
肖斌
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9901
建筑施工项目质量管理体系构建与改革举措
李军辉
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9902
基于多信息融合技术的国土空间规划体系设计
滕磊
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9903
高层建筑地基基础和桩基础土建施工技术研究
王兆乙
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9904
灌注桩后注浆施工技术在建筑工程施工中的应用研究
韩永先
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9905
新时代国土空间规划背景下乡村振兴规划设计探讨
孟梦
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9906
基于测绘工程测量中无人机遥感技术运用
葛龙魁
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9907
大型空分设备贫氪氙提取工艺过程风险分析及控制
王婷, 李登桐
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9908
建设工程全过程工程造价控制管理
李贵平
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9909
水生植物在污水处理和水质改善中的应用分析
周朝伟
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9910
探讨建筑工程项目管理中如何加强工程进度管理
陈岳
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9911
抬吊在钢包回转台整体更换中的应用
郑锟锟
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9912
洪塘水库沥青混凝土心墙石渣坝设计
邓刚, 彭宗兵
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9913
倾斜摄影测量技术在大比例尺基础测绘工程中的应用分析
高元
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9914
测绘工程技术在地籍测量中的应用研究
房强
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9915
建筑安全施工管理的策略在建筑施工中的应用
王禹
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9916
防渗漏的施工技术在房屋建筑工程中的应用
王凯
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9917
基于建筑工程后浇带施工技术探析
李小虎
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9918
常减压换热器装置防腐预防及分析
李智刚
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9919
石油化工转动设备的振动故障分析及处理
贾彭
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9920
建筑工程的造价的影响因素与降低工程造价的对策
翟罕旗
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9921
建筑工程管理及施工质量控制的有效的策略
陈磊
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9922
建筑工程大体积混凝土施工质量控制要点研究
张聪雷
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9923
冷轧辅助排程甘特图模型研究
田靖, 郭月
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9924
煤矿机电设备预防性检修的有效措施
慕振飞
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9925
城市绿化影响出行安全若干问题探讨
孔戈
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9926
建筑施工中砼质量问题剖析处理及改进
曾毅
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9927
金属非金属矿山机械设备安全管理
张金柱
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9928
冶金电气自动化设备故障诊断及维护
王星, 毛庆川, 陈锋
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9929
自动化技术在冶金生产中的应用及发展前景
毛庆川, 陈锋, 王星
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9930
冶金化验室安全管理的因素分析及对策探讨
李燕宾, 胡志俊, 穆世文
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9931
带钢表面在线检测与质量控制技术分析
张晓辉, 郭永朝, 霍江伟
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9932
热轧带钢表面质量缺陷原因
霍江伟, 张晓辉, 郭永朝
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9933
海绵城市理念在市政给排水设计中的运用探析
王影
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9934
各因素对热轧带肋钢筋抗拉强度检测结果影响研究
穆世文, 李燕宾, 胡志俊
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9935
无定向型导线边在矿山井下测量中的应用
吕志远
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9936
文保建筑群下方开发地下空间项目中的原位托换技术研究
张弛, 章谊, 朱伟敏
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9937
建筑工程造价的影响的因素与降低工程造价的对策
甘贵龙
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9938
“双碳”背景下BIM技术在绿色建筑正向设计中的应用
王梦媛
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9939
BIM技术在装配式建筑中的应用
殷宏静
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9940
谈低碳背景下绿色技术在建筑暖通设计中的应用
睢亚沛
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9941
水利管理信息化水情自动化建设的探索讨论
李志刚
Engineering Construction
|
Volume 6 Issue 11, 2023
|
PDF
DOI: 10.33142/ec.v6i11.9942
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.