
Engineering Construction
《工程建设》由新加坡Viser Technology Ptd Ltd主办,国际标准刊号:ISSN:2630-5283。本刊长期以来注重质量,编排规范,选稿较严格,学术水平较高,深受高校教师及科研院所研究人员青睐,Viser Technology Ptd Ltd官网、中国知网及维普网全文收录。
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Copyediting and Proofs
Manuscripts must be written either in good American or British English, in a clear language, correct punctuations, and consistent style throughout the manuscript. Authors are advised to send for professional English language editing service before submission. (Viser Manuscript Submission Template)
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical JournalsEditors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
期刊针对工程项目建设的全过程,重点报道工程建设过程的科研成果、先进技术、高效设备、新型材料、工程项目管理经验等,突出工程领域新技术、新工艺、新方法,反映建筑、水电、石化等工程领域新成果、新进展,促进工程技术行业的交流与成果展示,为推动国际工程技术和科学技术发展服务。
鼓励工程建设各领域的专业技术人员和管理干部以及大专院校相关专业的师生和科研人员来稿,有关国家科技计划、自然科学基金和各种部门、地方、院所科技基金资助项目的文章优先发布。
ISSN: 2630-5283 (online)
ISSN: 2717-5375 (print)
The publication frequency of this journal is Monthly
马磊 | 神华宁煤集团煤制油空分厂 | 中国 |
成岳 | 景德镇陶瓷大学 | 中国 |
杨高尚 | 中南大学 | 中国 |
吕尚辉 | 首创置业股份有限公司 | 中国 |
肖泳 | 中煤科工集团重庆设计研究院有限公司 | 中国 |
游天龙 | 山西吉利汽车部件有限公司 | 中国 |
赵玉凤 | 河南城建学院 | 中国 |
黄孟军 | 重庆文理学院 | 中国 |
贺海军 | 大庆油田有限责任公司 | 中国 |
徐鹏 | 河海大学 | 中国 |
Email: eng_constr@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 3, Issue 9, 2020
建筑工程施工技术以及其现场施工管理措施
朱鹏飞
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2505
铝合金模板施工应用全过程管理要点
王刚
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2506
风景园林绿化工程的现场施工与管理
周宇
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2507
风景园林施工管理存在的问题及对策
孙冲
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2508
反渗透水处理设备在工业污水处理中的应用分析
曹永红
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2509
论如何强化管道巡护确保输油安全
万文平
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2510
石油化工装置工艺管道设计的合理性探讨
孙涛
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2511
建筑工程施工现场安全管理工作分析
方鑫
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2512
工业与民用建筑施工中防水防渗技术的应用
刘磊
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2513
粗煤泥回收和分选工艺应用现状
杨磊
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2514
BIM在建筑工程管理中的应用探究
陈胜女
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2515
环境工程中环境影响评价的重要性论述
王雷
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2516
刍议道路桥梁沉降段路基路面的施工技术
张建康
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2517
建设工程电子招标投标存在问题及对策
郭嘉
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2518
建筑机电安装工程造价管理与成本控制的分析
葛勇
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2519
煤矿机电自动化技术的创新应用
郭建华
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2520
某含金矿石可选性试验研究
涂友兵, 陈建福, 吴为荣
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2521
土建施工中关键工序的技术质量控制
孙水智
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2522
高铁施工中预应力混凝土连续梁质量控制
王云良, 李保强
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2523
市政给排水工程施工质量的预防及控制对策
张玲
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2524
公路工程沥青路面施工现场试验检测技术
王芳
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2525
房屋建筑土木工程施工中的注浆技术分析
孟海昆
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2526
LF炉外精炼工艺的研究
赵志豪, 周晓雷
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2527
膨胀混凝土施工技术在建筑结构施工中的应用探讨
曹祥彬, 王永进
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2528
隧道基岩裂隙水及地下水的施工过程控制
王志永, 李培林
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2529
浅谈连续梁施工质量控制要点
李培林, 王志永
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2530
室外地下水池液位自动控制改造
崔维, 张建明
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2531
自动控制技术在大型垃圾发电厂的应用研究
岑运鹏
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2532
地理信息系统在测绘工程中的应用分析
张军, 满树徐
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2533
浅谈水工建筑结构施工技术应用
陶志文
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2534
隧道工程建设施工成本和造价管理控制
陈照海
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2535
园林绿化施工技术要点及保障措施
何修强
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2536
二七冰雪项目之冰上项目改造设计
刘颖, 林真丕
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2537
精细化管理模式在建筑工程物资材料管理中的应用
冉旭鹏
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2538
市政园林绿化养护管理常见问题和应对措施
邵建华
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2539
PLC技术在矿山机电控制中的运用分析
刘洪刚
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2540
铝模板技术在高层建筑施工中的运用分析
郑强, 李江滔, 邱弋珂, 罗春富
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2541
高层建筑基础底板大体积混凝土施工技术探讨
李江滔, 张小庆
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2542
高层建筑地基基础施工质量控制研究
李江滔, 唐江勇
Engineering Construction
|
Volume 3 Issue 9, 2020
|
PDF
DOI: 10.33142/ec.v3i9.2543
This journal charges an article processing charge of S$ 300.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.